Anker 3-Port USB 3.0 Portable Data Hub with 1 Gbps Ethernet Port Network Adapter for Macbook, Mac Pro / mini, iMac, XPS, Surface Pro, Notebooks, Desktop PCs, USB Flash Drives, Mobile HDD, and More

Anker 3-Port USB 3.0 Portable Data Hub
Anker 3-Port USB 3.0 Portable Data Hub

he Anker Advantage: Join the 20 million+ powered by our leading technology.
Quick Sync: Enjoy data transfer speeds of up to 5 Gbps. Transfer an HD movie in seconds.
Cabled Connection: Get reliable, fast access to the web at speeds of up to 1 Gbps through the Ethernet port.
Compact and Convenient: Distinctive “power-bar” design takes up the least possible amount of space in your computer bag.
What You Get: Anker 3-Port USB 3.0 Portable Data Hub and Ethernet Network Adapter, 1.6ft / 50cm USB 3.0 cable, welcome guide, our fan-favorite 18-month warranty and friendly customer service.



Works great. Internal chip was recognized as Realtek and no
Works great. Internal chip was recognized as Realtek and no driver download was needed on my Lenovo system, possibly because the built-in network port of the laptop already used a Realtek driver. Works great as secondary connection to a vSphere system, while the built-in network connection still maintains the office network connectivity.

I have not checked the current limits on the USB ports - I had all three USB ports in use (2x USB flash drives, 1x USB headset) without problems. I am sure that there are limits when using USB devices with a high current draw, since only a single upstream USB connection exists. But this is an understood limitation and I have no plans to "max out" the device - a portable hard drive (which typically would have a high current draw) will always be connected directly to the computer using a separate USB port and not through this USB hub.

Built quality is great, it's using a soft plastic matte surface.

I'm very happy with it so far.

Great performance, but has one small firmware issue.
For the testing in this review, I connected 2 PCs to a gigabit switch. PC1 used an Intel I219-V Ethernet adapter, while PC2 used the Anker3-Port USB hub + Ethernet adapter.
The Ethernet adapter used within the USB hub has a model number of: RTL8153

I have used This USB hub + gigabit Ethernet adapter for a few months now, and so far, the speeds have been great, and the reliability is decent., It can pretty much sustain around 940Mbps download throughput, thus after overhead, it is pretty much the full gigabit throughput.
Upload throughput had more variation, though it was still able to on average, remain close to 900Mbps.

In attempting to fully saturate the upload and download, The Ethernet controller in the USB hub, resets its self, thus it is not fully capable of handling a load which will fully saturate the upload and download simultaneously, though for the few milliseconds in which it was sending and receiving data, it was able to hit 1.4Gbit/s overall throughput, though the adapter kept crashing.

My final test, was to see how the adapter would handle me performing a linear read on a USB 3 flash drive with a top speed of 200MB/s, while simultaneously saturating the download throughput on the Ethernet controller. If you view the attached screenshot, we can see that the Ethernet adapter takes priority with this device. The moment I start the download benchmark, the read speed on the flash drive which is connected to the USB hub on the device, immediately drops from 200MB/s, to 158MB/s. This is an issue to be expected, as when you connect multiple devices to a hub (in the case of this USB hub, 3 USB ports, 1 Ethernet adapter, and about 1MB of internal ROM which contains drivers for older versions of windows. Overall, between all of the devices on the that the USB hub has, you are working with around 300MB/s worth of overall throughput, and the Ethernet adapter will get top priority on that available throughput.

Overall, I give it 4 stars out of 5. My reasoning for removing one star, is due to what is likely a firmware issue with the device where attempting to fully saturate the Ethernet controller's upload and download at the same time, will cause the adapter to essentially reboot. The hub remains connected, but the Ethernet controller, disconnects from the PC, and then reconnects. Under normal use I have not encountered this issue, as it is uncommon to saturate a network adapter in this way. With this being the case, it is still an issue as no other gigabit Ethernet adapter that I have tested encountered an issue such as this.
This device is good for a system which may only have 1 or 2 USB ports, where you need additional ports for multiple slower devices (e.g., an external hard drive, Ethernet, + a keyboard and mouse), but if you were to do something like connect multiple high bandwidth devices to it at once, e.g., an external hard drive + capture card, then it will likely not handle such a workload.
If this were a USB 3.1 gen 2 USB hub, then we may be able to handle such a workload, but with the limited throughput of USB 3.0, we cannot use the hub with multiple high bandwidth devices.

Very Good utility device for connecting a wirless laptop into a wired network, and providing 3 usable USB ports as well.
My lightweight laptop is wireless which is fine for travel. At my home-office I use an ethernet-cable network. When I'm at home, the Anker 3-Port USB connects the laptop into the ethernet-cable network. Its just simple plug-and-play, making it extremely easy to install and use. It works fine, and I use the USB ports for a label printer, an external hard drive, and a USB memory stick without any problem at all. This Anker device is well designed and does the job of connecting into a wired network very easily. The 3 USB ports give me further utility by accommodating the label printer, an external drive, and a thumb drive.